Tag Archives: conveyor chains manufacturer

China manufacturer Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel  roller chains

Product Description

Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel roller chains 

Product introduction

Material Carbon steel 40Mn alloy steel
Double Roller Chain
Surface Treatment Polishing,Original Colour,Polishing
Applicable Industries Building Material Shops, Manufacturing Plant, Machinery ………
Standard or Nonstandard Standard
Heat Treatment: High Temperature Hardening
Color Elf,dark yellow,dark blue,black
Features

•Large reduction ratio (usually up to 1:7)
•Chains can be used with long shaft center distances (normally up to 4m). By changing the number of links it is possible to freely adjust the shaft center distance.
•The chain can be used on both sides and drive multiple shafts at the same time.
•Easy installation and replacement (easy to cut and connect chains).
•If the distance between shafts is short, it can be used vertically.
•The sprocket diameter of a chain drive could be smaller than a belt pulley while transmitting the same torque.
•Transmitting power by meshing many teeth results in less wear of sprocket teeth than gears.
•Chain drives have greater shock absorption than gear drives.

 

HIGH STHangZhouRD HEAT TREATMENT

Through high standards,strictly control the heat,improve the hardness/strength and provide service life.

HIGH QUALITY MATERIAL

Beautiful and corrosion-resistant, the product surface is treated with rust prevention, beautiful and simple!

STHangZhouRD THICKNESS CHAIN PIECE

The thickness is customized from raw material chain plate in strict accordance with the standard

STHangZhouRD CZPT PIN

Cutting in strict accordance with the standard, second screening,
and never cut corners

Green Power Industry Co Llimited is an international export enterprise combined with factory specializing in the manufacturing of brake system , clutch system,spark plug and chain . Our company is a professional manufacturer and supplier of brake,chain and clutch in China. We both have our own brake CZPT factory, brake pad factory, brake shoe factory ,clutch disc factory,chain factory, spark plug factory .We focus on developing high-quality products for OEM market ,Our company have developed and produced high quality brake in formula non -metallic and asbestos free for automobile and brake shoe assembly for heavy duty truck . The production are noted good characteristics such as high strength , high heat-resisting , wear-resisting.low dust virtue ,no noise and better stability . The series products had been exporting to North -America ,Europe ,Middle -East ,Australia and etc, widely sale to domestic OEM factories and aftermarket.

Our company is composed of professional team , process advanced production inspection and testing equipment Each product have passed the first inspection, process inspection, error prevention, and laboratory tests to ensure that each piece of qualified products sent to customers

We are determined to set up the aim of “excellent quality and satisfying service·, with·the first class quality , reasonable price and perfect service . we set strick demand and operate conforming to the standard to guarantee all the products can be meet our customer’s needs
1.Q: What is the certificate of your factory?
   A: We have passed IAF ISO and TS16949  certification.

2.Q: Can it be produced according to the sample?
   A: Yes, we can produce through your samples or technical drawings. We can build molds and fixtures.

3.Q: Do you test all products before shipping?
   A: Yes, we conduct 100% quality testing before delivery, and we are 100% responsible for product quality.

4.Q: What is your delivery time?
   A:If we have stock, we can send it immediately within a week. If not, it usually ranges from 7 days to 35 days, depending on the quantity.

5.Q: What is your sample policy?
   A: We want to provide you with samples for approval. There will be no charge for 1 or 2 samples, but the customer needs to bear the courier fee first. 
It will be drawback to customer when order placed

6.Q: How do you make our business establish a long-term good cooperative relationship?
   A:1. We maintain excellent quality and competitive prices to ensure that our customers benefit;
      2. We respect every customer as our friend, we do business sincerely and make friends widely,No matter where they come from. 
 

Usage: Transmission Chain, Conveyor Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

drive chain

Can a drive chain be used in a HVAC or ventilation system?

Yes, a drive chain can be used in HVAC (Heating, Ventilation, and Air Conditioning) or ventilation systems where reliable and efficient power transmission is required. Here is a detailed explanation:

HVAC and ventilation systems utilize various components such as fans, blowers, dampers, and louvers to control air flow, temperature, and humidity in residential, commercial, and industrial buildings. Drive chains offer several advantages in these applications:

  • Reliable Power Transmission: Drive chains provide reliable power transmission for HVAC and ventilation systems. They are capable of transmitting power over long distances, accommodating various speeds and torque requirements, and operating in different directions of rotation.
  • Flexible System Design: Drive chains offer flexibility in system design and layout. They can be easily configured to connect and drive multiple components, such as fans, motors, and dampers, allowing for efficient control and adjustment of air flow and system performance.
  • Accurate Speed Control: Drive chains allow for precise speed control in HVAC systems. By using sprockets of different sizes or incorporating variable speed drives, the rotational speed of fans or blowers can be adjusted to achieve the desired air flow rates and maintain optimal environmental conditions.
  • High Load Capacity: HVAC and ventilation systems often require components to handle significant air volumes and pressure differentials. Drive chains are designed to handle high loads and transmit power effectively, ensuring reliable operation of fans, blowers, and other equipment.
  • Durability and Longevity: Drive chains are engineered to withstand the demanding conditions of HVAC and ventilation systems. They are designed to resist wear, corrosion, and fatigue, ensuring durability and long service life even in continuous or high-cycle operations.
  • Quiet Operation: Drive chains, when properly lubricated and maintained, can operate quietly in HVAC systems, minimizing noise and vibration levels. This is crucial for maintaining a comfortable and noise-free environment in residential, commercial, or institutional settings.

When selecting a drive chain for HVAC or ventilation applications, factors such as load capacity, speed requirements, environmental conditions (such as temperature and humidity), and maintenance considerations should be taken into account.

Regular inspection, lubrication, and tension adjustment are important for ensuring the optimal performance and longevity of the drive chain in HVAC and ventilation systems.

By utilizing drive chains in HVAC and ventilation systems, operators can benefit from reliable power transmission, flexible system design, accurate speed control, high load capacity, durability, longevity, and quiet operation, contributing to efficient and effective air conditioning and ventilation in various building environments.

drive chain

Can a drive chain be used in a printing or paper industry application?

Yes, a drive chain can be used in various applications within the printing and paper industry. Here is a detailed explanation:

The printing and paper industry requires reliable and precise power transmission solutions to operate machinery for tasks such as printing, cutting, folding, and conveying. Drive chains offer several advantages in these applications:

  • Precision and Accuracy: Drive chains provide accurate and repeatable power transmission, ensuring precise movement and control required in printing and paper industry applications.
  • High Load Capacity: Drive chains have high load-carrying capacity, making them suitable for conveying heavy rolls of paper, moving printing plates, or driving cutting and folding mechanisms.
  • Compact Design: Drive chains have a compact design, allowing them to fit in tight spaces and transmit power efficiently in confined areas commonly found in printing and paper machinery.
  • Reliability and Durability: Drive chains are known for their reliability and durability. They can withstand continuous operation, shock loads, and varying environmental conditions typically encountered in the printing and paper industry.
  • Customization and Adaptability: Drive chains offer flexibility and customization options to meet the specific needs of different printing and paper applications. They can be tailored in terms of size, pitch, attachments, and materials to accommodate various requirements.
  • Compatibility with Ancillary Devices: Drive chains can be easily integrated with other components commonly used in the printing and paper industry, such as tensioners, guides, sprockets, and bearings, to ensure optimal performance and reliability.

It is important to select the appropriate drive chain type, size, and material based on the specific requirements of the printing and paper application. Additionally, regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in these applications.

By leveraging the advantages of drive chains, the printing and paper industry can achieve efficient and reliable power transmission, enabling smooth operation and high-quality production.

China manufacturer Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel  roller chains  China manufacturer Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel  roller chains
editor by CX 2023-09-07

China manufacturer Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel  roller chains

Product Description

Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel roller chains 

Product introduction

Material Carbon steel 40Mn alloy steel
Double Roller Chain
Surface Treatment Polishing,Original Colour,Polishing
Applicable Industries Building Material Shops, Manufacturing Plant, Machinery ………
Standard or Nonstandard Standard
Heat Treatment: High Temperature Hardening
Color Elf,dark yellow,dark blue,black
Features

•Large reduction ratio (usually up to 1:7)
•Chains can be used with long shaft center distances (normally up to 4m). By changing the number of links it is possible to freely adjust the shaft center distance.
•The chain can be used on both sides and drive multiple shafts at the same time.
•Easy installation and replacement (easy to cut and connect chains).
•If the distance between shafts is short, it can be used vertically.
•The sprocket diameter of a chain drive could be smaller than a belt pulley while transmitting the same torque.
•Transmitting power by meshing many teeth results in less wear of sprocket teeth than gears.
•Chain drives have greater shock absorption than gear drives.

 

HIGH STHangZhouRD HEAT TREATMENT

Through high standards,strictly control the heat,improve the hardness/strength and provide service life.

HIGH QUALITY MATERIAL

Beautiful and corrosion-resistant, the product surface is treated with rust prevention, beautiful and simple!

STHangZhouRD THICKNESS CHAIN PIECE

The thickness is customized from raw material chain plate in strict accordance with the standard

STHangZhouRD CZPT PIN

Cutting in strict accordance with the standard, second screening,
and never cut corners

Green Power Industry Co Llimited is an international export enterprise combined with factory specializing in the manufacturing of brake system , clutch system,spark plug and chain . Our company is a professional manufacturer and supplier of brake,chain and clutch in China. We both have our own brake CZPT factory, brake pad factory, brake shoe factory ,clutch disc factory,chain factory, spark plug factory .We focus on developing high-quality products for OEM market ,Our company have developed and produced high quality brake in formula non -metallic and asbestos free for automobile and brake shoe assembly for heavy duty truck . The production are noted good characteristics such as high strength , high heat-resisting , wear-resisting.low dust virtue ,no noise and better stability . The series products had been exporting to North -America ,Europe ,Middle -East ,Australia and etc, widely sale to domestic OEM factories and aftermarket.

Our company is composed of professional team , process advanced production inspection and testing equipment Each product have passed the first inspection, process inspection, error prevention, and laboratory tests to ensure that each piece of qualified products sent to customers

We are determined to set up the aim of “excellent quality and satisfying service·, with·the first class quality , reasonable price and perfect service . we set strick demand and operate conforming to the standard to guarantee all the products can be meet our customer’s needs
1.Q: What is the certificate of your factory?
   A: We have passed IAF ISO and TS16949  certification.

2.Q: Can it be produced according to the sample?
   A: Yes, we can produce through your samples or technical drawings. We can build molds and fixtures.

3.Q: Do you test all products before shipping?
   A: Yes, we conduct 100% quality testing before delivery, and we are 100% responsible for product quality.

4.Q: What is your delivery time?
   A:If we have stock, we can send it immediately within a week. If not, it usually ranges from 7 days to 35 days, depending on the quantity.

5.Q: What is your sample policy?
   A: We want to provide you with samples for approval. There will be no charge for 1 or 2 samples, but the customer needs to bear the courier fee first. 
It will be drawback to customer when order placed

6.Q: How do you make our business establish a long-term good cooperative relationship?
   A:1. We maintain excellent quality and competitive prices to ensure that our customers benefit;
      2. We respect every customer as our friend, we do business sincerely and make friends widely,No matter where they come from. 
 

Usage: Transmission Chain, Conveyor Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

drive chain

What are the advantages of using a lightweight drive chain?

Using a lightweight drive chain offers several advantages in certain applications where weight reduction is a critical factor. Here is a detailed explanation:

Lightweight drive chains are specifically designed to provide reliable power transmission while minimizing the overall weight of the system. The advantages of using such chains include:

  • Improved Energy Efficiency: Lightweight drive chains reduce the overall mass and inertia of the power transmission system. This results in improved energy efficiency, as less power is required to accelerate and decelerate the lighter components. Reduced energy consumption contributes to cost savings and promotes sustainability.
  • Enhanced System Performance: By reducing the weight of the drive chain, the overall system performance can be improved. The reduced mass allows for quicker response times, faster acceleration, and improved dynamic performance of the machinery or equipment. This can be particularly beneficial in applications that require rapid changes in speed or direction.
  • Increased Speed Capability: Lightweight drive chains enable higher speeds due to reduced inertia and decreased centrifugal forces. This allows for faster operation, quicker cycle times, and improved productivity in applications that demand high-speed power transmission.
  • Reduced Wear and Friction: The lighter weight of the drive chain can contribute to reduced wear and friction between the chain and the sprockets. With less weight bearing on the chain and sprocket teeth, there is reduced contact stress and improved lubrication distribution. This leads to lower frictional losses, decreased wear, and extended chain life.
  • Easier Installation and Maintenance: Lightweight drive chains are easier to handle and install compared to heavier chains, reducing the physical strain on operators during installation or maintenance tasks. The reduced weight simplifies handling and improves overall ergonomics, making it more convenient for operators to work with the chain.
  • Application Versatility: Lightweight drive chains can be used in a wide range of industries and applications where weight reduction is advantageous. They are commonly employed in sectors such as automotive, robotics, aerospace, and portable equipment, where lightweight components contribute to improved performance and fuel efficiency.

It is important to consider the specific requirements and constraints of the application when selecting a lightweight drive chain. Factors such as load capacity, speed capabilities, environmental conditions, and material selection should be taken into account.

While lightweight drive chains offer numerous benefits, it is crucial to ensure that their reduced weight does not compromise their load-carrying capacity or durability. Regular maintenance, including proper tensioning, lubrication, and periodic inspection, is essential to maintain the optimal performance and reliability of lightweight drive chains.

By utilizing lightweight drive chains in appropriate applications, operators can benefit from improved energy efficiency, enhanced system performance, increased speed capabilities, reduced wear and friction, easier installation and maintenance, and overall weight reduction, contributing to improved efficiency and performance of the power transmission system.

drive chain

Can a drive chain be used in a printing or paper industry application?

Yes, a drive chain can be used in various applications within the printing and paper industry. Here is a detailed explanation:

The printing and paper industry requires reliable and precise power transmission solutions to operate machinery for tasks such as printing, cutting, folding, and conveying. Drive chains offer several advantages in these applications:

  • Precision and Accuracy: Drive chains provide accurate and repeatable power transmission, ensuring precise movement and control required in printing and paper industry applications.
  • High Load Capacity: Drive chains have high load-carrying capacity, making them suitable for conveying heavy rolls of paper, moving printing plates, or driving cutting and folding mechanisms.
  • Compact Design: Drive chains have a compact design, allowing them to fit in tight spaces and transmit power efficiently in confined areas commonly found in printing and paper machinery.
  • Reliability and Durability: Drive chains are known for their reliability and durability. They can withstand continuous operation, shock loads, and varying environmental conditions typically encountered in the printing and paper industry.
  • Customization and Adaptability: Drive chains offer flexibility and customization options to meet the specific needs of different printing and paper applications. They can be tailored in terms of size, pitch, attachments, and materials to accommodate various requirements.
  • Compatibility with Ancillary Devices: Drive chains can be easily integrated with other components commonly used in the printing and paper industry, such as tensioners, guides, sprockets, and bearings, to ensure optimal performance and reliability.

It is important to select the appropriate drive chain type, size, and material based on the specific requirements of the printing and paper application. Additionally, regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in these applications.

By leveraging the advantages of drive chains, the printing and paper industry can achieve efficient and reliable power transmission, enabling smooth operation and high-quality production.

drive chain

How do you properly tension a drive chain?

Tensioning a drive chain properly is important to ensure optimal performance, minimize wear, and prevent premature failure. Here are the steps to properly tension a drive chain:

  1. Identify the Tensioning Method: Determine the type of tensioning system used for your specific drive chain. Common tensioning methods include manual adjustment, automatic tensioners, or tensioning devices incorporated into the chain drive system.
  2. Refer to Manufacturer’s Guidelines: Consult the manufacturer’s guidelines or specifications for the recommended tensioning range and procedure specific to your drive chain. Manufacturers often provide specific instructions regarding the appropriate tensioning method and the acceptable slack or sag limits.
  3. Measure the Initial Tension: Measure the initial tension of the drive chain. This can be done using a tension gauge or by applying manual force to the chain at a specific point and measuring the deflection or sag. Ensure that the initial tension is within the recommended range specified by the manufacturer.
  4. Adjust Tension: If the initial tension is outside the recommended range, adjust the tension accordingly. For manual tensioning systems, typically a tensioning device, such as an adjusting bolt or eccentric cam, is used to increase or decrease the tension. Follow the manufacturer’s instructions for the specific adjustment mechanism.
  5. Check Alignment: While tensioning the chain, ensure that it remains properly aligned on the sprockets. Misalignment can cause uneven wear and premature failure. Make any necessary alignment adjustments as per the manufacturer’s recommendations.
  6. Recheck Tension: After tension adjustment and alignment, recheck the tension to ensure it falls within the recommended range. Use a tension gauge or follow the manufacturer’s guidelines for measuring the tension. Repeat the adjustment process if necessary.
  7. Verify Operation: After tensioning, operate the machinery or system with the tensioned chain and observe its performance. Check for any abnormal noise, vibration, or unusual wear patterns. If any issues persist, reevaluate the tensioning and alignment.

It is important to note that proper tensioning may require periodic rechecks and adjustments over time as the chain elongates or wears. Regular maintenance and inspections will help ensure the drive chain remains properly tensioned and aligned for optimal performance and longevity.

China manufacturer Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel  roller chains  China manufacturer Drive chain conveyor drives standard pitch industrial heavy-duty Carbon steel  roller chains
editor by CX 2023-07-20

China manufacturer Conveyor Belt Parts Transmission Gearbox China Manufacturer High-Intensity and High Precision and Wear Resistance Motorcycle Chains with Great quality

Solution Description

SMCC are 1 professional  industry rollor chain factory ,  We have stamping, heat treatment method, sorting, synthesis and other innovative generation equipment.The business offers a number of massive precision innovative equipments, mordern techniques for cess and precision devices, so as to insure the excellent high quality of our rollor chains.Our rollor chains are extensively used in bike, blend harvester, metallurgical equipment, mining products, automatic creation line. We are the greatest suppliers of Chinese biggest palletizing robot enterprises. And exchange Japan, ZheJiang exported to Europe, The usa, Asia and other nations and areas.

Basic INFO 
SMCC roller chain is 1 of the most commonly employed and welcome items in the market place. Its constant revolutionary development is appropriate to be the remedies for many situations, common roller chains, bike driving chain, O-ring motorbike chain, higher energy roller chain, conveyor chains, agricultural driving chain, galvanized chain, nickel-plated chain, lubrication-free of charge chain and oilfield chain and many others.

ISO
Chain No.
Chain No. Pitch P
mm
Roller diameter
d1max
mm
Width among inner plates
b1min
mm
Pin diameter
d2max
mm
Pin duration Inner plate depth
h2max
Plate thickness
t/Tmax
Tensile energy
Qmin
Average tensile power
Q0
Weight per meter
q
Lmax Lcmax
mm mm mm mm kN/lbf kN kg/m
9.525   6 9.five four.5 eighteen.six 20 nine.three 1.85/1.fifty 11.eighty/2653 thirteen.six .sixty one
420 420 twelve.seven 7.seventy seven 6.25 three.96 14.seven sixteen.1 twelve one.five 16.00/3597 17.six .55
420F3 12.7 seven.77 six.four three.ninety seven 15 sixteen.six 11.eight 1.60/1.45 sixteen.00/3597 17.6 .sixty four
420HF1 12.seven seven.77 six.twenty five 3.ninety six seventeen eighteen.four twelve 2.03 sixteen.00/3597 17.six .seventy six
420HT twelve.7 seven.seventy seven six.twenty five three.ninety six seventeen twelve two.03 21.forty/4811 23.five .seventy six
428 428 twelve.7 8.fifty one 7.75 four.forty five sixteen.seven eighteen.2 eleven.eight one.six 17.80/4002 19.6 .7
428F1 twelve.seven 8.51 seven.94 four.5 sixteen.seven 18.05 11.eight 1.6 17.15/3855 19.4 .seventy one
428DS twelve.7 eight.fifty one 7.ninety four four.forty five seventeen.9 19.3 12 one.85 18.62/4186 21 .seventy six
428MH 428H twelve.seven 8.51 7.85 four.45 18.eight 19.nine eleven.8 two.03 20.60/4631 23.four .79
428HF1 twelve.seven eight.fifty one 7.eighty five four.forty five seventeen.9 19 eleven.eight one.8 19.fifty/4384 20.seven .74
428HSH 12.seven 8.fifty one 7.75 four.45 twenty 12 2.forty two 27.00/6070 29.4 .89
428HF4 12.seven eight.51 7.ninety four 4.five 18.9 twenty.1 11.eight 2.03 twenty.fifty/4609 23.4 .82
428HD 12.7 8.fifty one seven.eighty five 4.forty five eighteen.8 19.nine eleven.8 two.03 20.60/4631 23.4 .eighty five
428F3 12.7 eight.fifty one seven.eighty five 4.forty five 16.seven eighteen.2 eleven.7 one.6 17.80/4002 19.6 .seventy seven
428F4 twelve.7 8.fifty one seven.eighty five 4.forty five sixteen.seven eighteen.2 11.8 1.6 seventeen.80/4002 19.six .72
520 520 fifteen.875 ten.sixteen six.twenty five five.08 17.five 19 fifteen.09 two.03 26.fifty/5957 29.7 .89
520F2 15.875 ten.16 6.35 5.24 seventeen.five 19.05 15.09 2.03 26.fifty/5957 29.seven .97
520F3 15.875 10.sixteen 6.forty eight 5.08 seventeen.five 19 fifteen.09 two.03 26.50/5957 29.7 .89
520MH 520MH 15.875 ten.22 6.25 five.twenty five 19 21.2 15.three 2.two thirty.fifty/6857 33.6
520HD fifteen.875 10.16 six.35 5.34 18.six 20 15.09 two.2 35.00/7868 38.five 1.04
525 525 15.875 10.sixteen seven.95 5.08 19.three 20.seven fifteen.09 two.03 26.fifty/5957 29.7 1.06
525MH 525MH fifteen.875 ten.22 seven.eighty five 5.25 21.2 23.two fifteen.3 two.two thirty.fifty/6857 33.6
525HF1 fifteen.875 10.sixteen seven.95 five.08 20.9 22.three 15.09 2.42 26.50/5957 29.7 one.2
530 530 fifteen.875 10.sixteen 9.4 5.08 twenty.seven 22.2 15.09 2.03 26.fifty/5957 29.7 1.06
530SH fifteen.875 10.16 nine.four five.08 22.1 15.09 two.42 32.80/7374 33.five one.24
520F12 fifteen.875 10.16 six.25 five.twenty five seventeen.6 15 2.03 29.43/6615 32.three .98
520HF7 fifteen.875 10.22 seven.eight 5.three 21.35 15.3 2.8/2.42 forty.00/8992 44 one.forty three
630 630 19.05 11.ninety one nine.four 5.ninety four 23 24.eight eighteen two.forty two 35.thirty/7936 38.8

Chain No.

Pitch

P
mm

Roller diameter

d1 max
mm

Width amongst
inner plates

b1 min
mm

Pin diameter

d2 max
mm

Pin duration Inner plate
depth

h2 max
mm

Plate thickness

T
max
mm

Tensile power

Q
min
kN/lbf

Average tensile
energy

Q0
kN

Weight for each
meter
q kg/m
Lmax
mm
Lcmax
mm
420 OR twelve.700 seven.77 six.25 3.96 sixteen.sixty five seventeen.95 twelve.00 1.fifty sixteen./3599 17.00 .sixty two
420H OR twelve.700 seven.seventy seven 6.twenty five 3.96 18.80 20.ten 12.00 2.03 16./3599 seventeen.00 .74
428HVS 12.seven-hundred 8.fifty one seven.94 four.45 21.70 22.70 twelve.30 two.03 22./4946 23.00 .85
50LD fifteen.875 ten.sixteen nine.53 5.08 23.40 24.sixty 15.09 2.03 22.2/5045 26.50 1.12
520 OR fifteen.875 10.16 six.70 five.30 21.20 22.thirty 15.09 2.20 32./7200 34.00 1.11
520F1 OR 15.875 ten.16 6.25 5.thirty 21.twenty 22.30 fifteen.09 two.20 32./7200 34.00 one.09
520F2 OR 15.875 10.16 nine.sixty five five.30 24.10 twenty five.fifty fifteen.09 2.20 32./7200 34.00 1.21
520V6 15.875 ten.16 six.twenty five five.08 19.80 21.30 15.09 two.03 22.2/5045 26.50 .ninety six
520H OR 15.875 ten.sixteen 6.25 five.24 21.52 22.ninety two fifteen.09 two.forty two 26.5/6571 29.sixty one.26
525 OR fifteen.875 ten.sixteen 7.ninety five five.30 21.fifty 22.90 fifteen.09 two.03 26.5/6571 29.60 1.thirty
525F1 OR fifteen.875 ten.sixteen seven.95 5.thirty 23.10 24.00 fifteen.09 2.20 32./7200 34.00 1.sixteen
520F14 OR 15.875 ten.twenty 6.25 five.09 19.90 fourteen.ninety 1.80 28.4/6391 30.sixty .ninety two
525H OR 15.875 10.16 7.95 5.30 23.10 24.50 15.09 two.42 26.5/6571 29.sixty 1.forty four
530H OR fifteen.875 ten.16 nine.53 5.24 24.eighty 26.twenty 15.09 two.42 29./6524 thirty.00 1.39
630F1 OR 19.050 eleven.ninety one nine.fifty three five.94 25.50 27.30 eighteen.00 2.forty two 31.8/7149 35.00 one.fifty

 

ISO
Chain No.

Chain No.

Pitch

P
mm

Bush diameter

d1 max
mm

Width between
inner plates
b1 min
mm
Pin diameter

d2 max
mm

Pin duration

L
max
mm

Inner plate
depth
h2 max
mm
Plate thickness

t/T max
mm

Tensile toughness

Q
min
kN/lbf

Regular tensile
energy
Q0
kN
Bodyweight for each
meter
q kg/m
25 6.350 3.thirty 3.18 two.31 7.90 six.00 .80 3.5/795 four.6 .fifteen
25H 25H six.350 three.30 3.eighteen two.31 8.90 6.00 one.04 4.8/1091 five.5 .seventeen
25H(E) 6.350 3.30 three.eighteen two.31 eight.90 6.00 1.04 5.8/1304 six.four .eighteen
25HF2 six.350 3.30 three.eighteen 2.31 9.ten 5.eighty 1.2/1.ten five.8/1304 six.four .19
25SHF1 6.350 three.30 3.18 2.01 8.95 5.ninety one.04 four.8/1091 five.five .19
219H 219H 7.774 4.59 five.00 three.01 11.90 seven.40 1.2/1.04 7.3/1641 8. .28
*C219H seven.774 four.59 five.00 three.01 eleven.90 7.40 1.2/1.04 7.3/1641 8. .33
219HT seven.774 4.59 four.60 3.01 twelve.15 seven.55 1.4/1.three 6.6/1483 7.2 .33
219HF2 7.774 4.fifty nine 4.50 3.01 eleven.90 seven.forty one.4/1.three six.6/1483 7.2 .31
219HF1 seven.785 four.sixty 4.50 three.28 13.00 seven.00 two./1.forty 9./2571 9.eight .37
270H 270H eight.500 5.00 4.seventy five three.28 13.fifteen 8.45 1.8/1.forty ten.8/2428 11.nine .forty three

Package deal & Shipping

SMCC Chains is 1 of the most broadly utilised and welcome items in the marketplace. Its steady revolutionary development is ideal to be the solutions for many problems, standard roller chains, bike driving chain, O-ring motorcycle chain, substantial power roller chain, conveyor chains, agricultural driving chain, galvanized chain, nickel-plated chain, lubrication-totally free chain and oilfield chain etc.

Our SMCC chain was made by machinery processing from uncooked supplies to completed products and a total set of good quality tests tools. Mechanical processing products consist of grinding devices, high velocity punching equipment, milling machines, large speed automatic rolling and assembling equipment. Warmth remedy was processed by constant mesh belt conveyor furnace, mesh belt conveyor annealing furnace, advanced central control program of heat treatment method, rotary CZPT for chain component heat treatment method, which guarantee the security and consistency of the key operate of chain elements.
We are the very best suppliers of Chinese greatest palletizing robot enterprises. These products are tough high quality with cost-effective prices, change of Japan chains, ZheJiang chains exported to Europe, The usa, Asia and other international locations and regions.

USE

An instance of 2 ‘ghost’ sprockets tensioning a triplex roller chain method
Roller chains are employed in lower- to mid-speed drives at around 600 to 800 ft for each minute nonetheless, at higher speeds, all around 2,000 to 3,000 feet per moment, V-belts are usually employed thanks to put on and noise troubles.
A bicycle chain is a sort of roller chain. Bicycle chains may have a master website link, or could demand a chain device for elimination and installation. A equivalent but greater and hence more robust chain is employed on most bikes though it is often replaced by both a toothed belt or a shaft drive, which offer you lower noise degree and much less servicing specifications.
The fantastic bulk of vehicle engines use roller chains to push the camshaft(s). Extremely high functionality engines usually use equipment travel, and commencing in the early sixties toothed belts were utilized by some makers.
Chains are also used in forklifts using hydraulic rams as a pulley to CZPT and lower the carriage nonetheless, these chains are not deemed roller chains, but are classified as raise or leaf chains.
Chainsaw reducing chains superficially resemble roller chains but are far more closely associated to leaf chains. They are driven by projecting travel backlinks which also serve to locate the chain on to the bar.

Sea Harrier FA.2 ZA195 entrance (chilly) vector thrust nozzle – the nozzle is rotated by a chain push from an air motor
A maybe uncommon use of a pair of motorbike chains is in the Harrier Bounce Jet, exactly where a chain travel from an air motor is utilized to rotate the movable engine nozzles, making it possible for them to be pointed downwards for hovering flight, or to the rear for standard forward flight, a program known as Thrust vectoring.

BICYCLE CHAIN Wear

The lightweight chain of a bicycle with derailleur gears can snap (or relatively, come aside at the facet-plates, considering that it is typical for the “riveting” to fall short first) because the pins within are not cylindrical, they are barrel-formed. Get in touch with among the pin and the bushing is not the typical line, but a position which permits the chain’s pins to operate its way by means of the bushing, and lastly the roller, eventually causing the chain to snap. This form of design is required because the gear-modifying motion of this kind of transmission requires the chain to equally bend sideways and to twist, but this can occur with the versatility of this sort of a narrow chain and comparatively big free lengths on a bicycle.

Chain failure is much significantly less of a issue on hub-geared programs (e.g. Bendix 2-speed, Sturmey-Archer AW) since the parallel pins have a significantly greater donning area in make contact with with the bush. The hub-gear system also allows full enclosure, a great aid to lubrication and defense from grit.

CHAIN Strength

The most common evaluate of roller chain’s power is tensile energy. Tensile power represents how a lot load a chain can endure under a one-time load ahead of breaking. Just as essential as tensile energy is a chain’s fatigue energy. The critical aspects in a chain’s tiredness toughness is the quality of steel utilised to manufacture the chain, the warmth treatment method of the chain components, the quality of the pitch gap fabrication of the linkplates, and the variety of shot additionally the intensity of shot peen coverage on the linkplates. Other elements can include the thickness of the linkplates and the style (contour) of the linkplates. The rule of thumb for roller chain working on a ongoing travel is for the chain load to not CZPT a mere 1/6 or 1/9 of the chain’s tensile energy, depending on the sort of master back links utilized (press-suit vs. slip-suit)[citation essential]. Roller chains operating on a continuous drive past these thresholds can and generally do are unsuccessful prematurely by way of linkplate exhaustion failure.

The regular least greatest power of the ANSI 29.1 metal chain is twelve,500 x (pitch, in inches)two. X-ring and O-Ring chains greatly lessen use by means of internal lubricants, increasing chain existence. The internal lubrication is inserted by signifies of a vacuum when riveting the chain jointly.

CHAIN STHangZhouRDS

Requirements businesses (this sort of as ANSI and ISO) sustain standards for design and style, dimensions, and interchangeability of transmission chains. For instance, the following Table exhibits info from ANSI normal B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][ten] for extra data.

ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Dimensions
Measurement Pitch Highest Roller Diameter Least Supreme Tensile Energy Measuring Load
twenty five .250 in (6.35 mm) .a hundred thirty in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.fifty three mm) .two hundred in (5.08 mm) one,760 lb (800 kg) 18 lb (8.2 kg)
forty one .five hundred in (twelve.70 mm) .306 in (7.77 mm) 1,500 lb (680 kg) eighteen lb (8.2 kg)
40 .500 in (twelve.70 mm) .312 in (7.92 mm) three,a hundred twenty five lb (1,417 kg) 31 lb (14 kg)
50 .625 in (15.88 mm) .four hundred in (ten.sixteen mm) four,880 lb (2,210 kg) forty nine lb (22 kg)
60 .750 in (19.05 mm) .469 in (11.ninety one mm) seven,030 lb (3,190 kg) 70 lb (32 kg)
eighty one.000 in (25.forty mm) .625 in (15.88 mm) 12,500 lb (5,seven-hundred kg) one hundred twenty five lb (57 kg)
one hundred one.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 one.five hundred in (38.ten mm) .875 in (22.23 mm) 28,a hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
140 1.750 in (forty four.forty five mm) 1.000 in (twenty five.forty mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 two.000 in (fifty.80 mm) one.a hundred twenty five in (28.fifty eight mm) fifty,000 lb (23,000 kg) 500 lb (230 kg)
a hundred and eighty 2.250 in (fifty seven.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven hundred kg) 633 lb (287 kg)
two hundred 2.five hundred in (63.fifty mm) one.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (forty seven.sixty three mm) 112,500 lb (fifty one,000 kg) 1,000 lb (450 kg

For mnemonic functions, beneath is yet another presentation of essential dimensions from the identical standard, expressed in fractions of an inch (which was component of the thinking driving the selection of desired numbers in the ANSI common):

Pitch (inches) Pitch expressed
in eighths
ANSI common
chain variety
Width (inches)
one4 2eight 2five oneeight
threeeight 3eight 3five threesixteen
12 four8 41 14
12 foureight 4 fivesixteen
58 58 five threeeight
34 six8 6 onetwo
one 88 eight 5eight

Notes:
1. The pitch is the distance between roller centers. The width is the length amongst the url plates (i.e. somewhat far more than the roller width to let for clearance).
two. The correct-hand digit of the normal denotes = typical chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the quantity of eighths of an inch that make up the pitch.
4. An “H” adhering to the normal number denotes heavyweight chain. A hyphenated quantity pursuing the normal variety denotes double-strand (2), triple-strand (3), and so on. As a result 60H-3 denotes quantity sixty heavyweight triple-strand chain.
A common bicycle chain (for derailleur gears) makes use of narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not have an effect on the load ability. The far more sprockets at the rear wheel (traditionally 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are bought according to the amount of speeds they are designed to function with, for illustration, “ten pace chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, exactly where 1/8″ refers to the optimum thickness of a sprocket that can be utilised with the chain.

Usually chains with parallel formed backlinks have an even number of backlinks, with every slim url adopted by a broad 1.Chains created up with a uniform type of website link, slender at 1 and wide at the other stop, can be manufactured with an odd quantity of back links, which can be an edge to adapt to a specific chainwheel-distance on the other aspect this kind of a chain tends to be not so sturdy.

Roller chains made using ISO standard are sometimes named as isochains.

WHY Choose US

one. Dependable Quality Assurance Method
2. Chopping-Edge Computer-Managed CNC Machines
3. Bespoke Remedies from Highly Seasoned Specialists
four. Customization and OEM Accessible for Particular Application
five. Comprehensive Stock of Spare Parts and Add-ons
six. Effectively-Designed Worldwide Marketing Network
7. Productive Right after-Sale Services Program

 

The 219 sets of advanced computerized manufacturing gear provide assures for high product quality. The 167 engineers and specialists with senior specialist titles can style and produce items to fulfill the specific needs of customers, and OEM customizations are also available with us. Our seem international provider network can offer consumers with timely soon after-sales complex providers.

We are not just a manufacturer and supplier, but also an sector specialist. We operate professional-actively with you to offer you skilled suggestions and item tips in buy to conclude up with a most cost effective merchandise obtainable for your distinct application. The clients we provide worldwide assortment from finish consumers to distributors and OEMs. Our OEM replacements can be substituted anywhere required and appropriate for the two restore and new assemblies.
 

 

 

 

 

 

 

The roller chain operates on rotating sprockets related to the motor that drives the chain. In most roller chains, there are two sorts of hyperlinks utilised alternately to make it function. Internal sign up for (also called roller join): The two interior plates are joined together by two sleeves or bushings under the two rollers. Outer ring (also called pin ring): The two outer plates are pinned jointly, by means of the bushing of the interior ring.
No matter whether you are creating from scratch or updating an current undertaking, obtaining the correct size for your roller chain is a essential 1st selection. To precisely measure a roller chain, you require to know the overall width, diameter, and width of the rollers, plate thickness, and height.